Troubleshooting - Vacmaster VQ1530SFDC Handbuch

WARNING:

TROUBLESHOOTING.

Cleaning Performance
Vacmaster vacuum cleaners are tested for endurance. If your motor is operating, then the most
likely cause for a loss in suction is a blockage or an opening in the vacuum.
To maintain a high cleaning performance from your machine, it is important to replace or clean
cartridge filters as necessary. Replace full dust bags to prevent performance drops. A performance
drop with clean filters can only be caused by a blockage in the tools or the hose.
PROBLEM
The appliance does
not work.
Dust is escaping from
the motor cover.
Power tool take-off
socket does not work.
Low suction power
and high operating
noise / vibrations.
TROUBLESHOOTING
TO REDUCE THE RISK OF ELECTRIC SHOCK-UNPLUG BEFORE
POSSIBLE CAUSE
No power.
Functional fault in the power
cord, switch, or motor.
The cartridge filter is missing
or damaged.
Misuse the cartridge filter
when wet vacuuming, causing
the damage of cartridge filter
Misuse the foam filter when
dry vacuuming.
Power tool wattage is not
compatible with the power
take-off socket.
Incorrect operating mode
selected.
Dust bag is full.
Suction nozzle, hose, or tank
inlet is blocked.
Cartridge filter is blocked.
Float valve has closed.
Check the power supply and fuse.
Have the damaged part checked by
qualified personnel or contact the after
sales helpline.
Put in a cartridge filter or replace it.
Replace the damaged cartridge filter
with a new one when dry vacuuming.
Replace the foam filter with the
cartridge filter.
Check the wattage is compatible with
the power tool take-off socket.
Ensure the switch is moved into
position II.
Replace the dust bag.
Check the suction nozzle, hose, and
tank inlet for obstructions.
Remove the cartridge filter and clean.
Empty the container of any liquid
waste and ensure the float value
located underneath the filter is able to
move freely.
11
SOLUTION
GB