Unpacking And Product Features; Assembly - Vacmaster Orson Lite VSE2101EU Bedienungsanleitung

UNPACKING AND PRODUCT FEATURES

1 Charging Port
2 Power Switch
3 Dust Bin Door Release Button
4 Suction Wand
5 Motorised Floor Head
6 Motorised Floor Head Release Button
7 Wand Release Button
8 Motor Head Release Button
9 Speed Adjustment Switch
1. Remove all the contents from the packaging; make sure you have all contents as listed on
page 7.
2. Insert the handheld vacuum into the top of the suction wand and lock into place until you hear a
click (Fig. 1).
3. Insert the wand into the neck of the motorised floor head ensuring that there is nothing trapped
between the unit connections. Make sure the wand is locked into place until you hear a click (Fig. 2.)
Affix Wall Mount
Use the 2 screws provided to secure the wall mount on the wall. Ensure you use suitable wall plug
fixings depending on the wall structure. Mount at a minimum height of 44'' above the floor. Ensure
that no plumbing, electrical cables or wires are located directly behind the mounting area (Fig. 3).
Align the base of the handheld vacuum with the wall mount and slide in as shown in the picture (Fig. 4).
NOTE: To be able to charge vacuum while it is mounted, attach wall mount to wall no more than
59" from an electrical power outlet (Fig. 5).
Battery Power Level Indicator/Battery
10
Charging Indicator
11 Filter (x2) (x1 pre-installed)
12 Filter Cage
13 Dust Bin
14 Combination Tool
15 Wall Mount
16 Screw (x2)
17 Charging Adapters
18 Instruction Manual

ASSEMBLY

7
GB