General Information; Warranty - Becker Centronic TC4410 Montage- Und Betriebsanleitung

Assembly and Operating Instructions

General information

The TC4410 is compatible with all receivers of the Becker Centronic control unit
range.
The 10 channels allow you to control roller shutter and sun protection systems,
lighting control systems and radio controlled sockets.
In addition to the 10 individual channels, the TC4410 also has 3 central channels
which activate channels 1-5, 6-10 and 1-10.
The TC4410 is factory set with the current time (CET) and date and controls the
drives in the mornings at the programmed switching time and in the evenings
at the astro time (sunset). The switching times can be individually adjusted per
channel. Therefore, it is possible to carry out up to 10 different up/down times
or switching on/off times automatically.
Via the intermediate position setting it is possible to access 2 different positions
for roller shutter or sun protection applications and 2 different brightness levels
for lighting control systems per channel (scene control).
This device is characterised by its user-friendly operation.

Warranty

Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g. crushing
of limbs. Therefore, structural modifications should only be carried out with our
prior approval and in accordance with our instructions, particularly the informa-
tion contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intend-
ed use is not permitted.
The end product manufacturer and fitter have to ensure that all the current stat-
utory, official regulations and, in particular, EMC regulations are adhered to dur-
ing utilisation of our products, especially with regard to end product assembly,
installation and customer advice.
28