Explanation Of Symbols; Intended Use - WIKA CPT7000-IS Betriebsanleitung

3. Safety
3. Safety

3.1 Explanation of symbols

EN
WARNING!
... indicates a potentially dangerous situation that can result in serious injury
or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries or
damage to property or the environment, if not avoided.
GEFAHR!
... indicates a potentially dangerous situation in the hazardous area that can
result in serious injury or death, if not avoided.
Information
... points out useful tips, recommendations and information for efficient and
trouble-free operation.

3.2 Intended use

The reference pressure sensor serves for the accurate determination of the pressure
value. The measured pressure is output as an electrical signal.
The model CPT7000-IS reference pressure sensor has been designed specifically for use
with the model CPH7000-IS process calibrator. The electrical signals and connections
have been accurately matched for this purpose. Any other usage is not possible and can
lead to the invalidation of the approvals.
Only use the reference pressure sensor in applications that lie within its technical
performance limits (e.g. max. ambient temperature, material compatibility, ...). For
performance limits see chapter 9 "Specifications".
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the instrument outside of its technical specifications
requires the instrument to be taken out of service immediately and inspected by an
authorised WIKA service engineer.
8 WIKA operating instructions, reference pressure sensor, model CPT7000-IS