General Information - WIKA CPT7000-IS Betriebsanleitung

1. General information

1. General information
The model CPT7000-IS reference pressure sensor described in the operating
■
instructions has been designed and manufactured using state-of-the-art technology.
EN
All components are subject to stringent quality and environmental criteria during
production. Our management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the instrument.
■
Working safely requires that all safety instructions and work instructions are observed.
These operating instructions for the model CPT7000-IS reference pressure sensor are
■
valid in combination with the operating instructions for the "model CPH7000 portable
process calibrator" (article number 14204467). The CPT7000-IS can only be used in
combination with the CPH7000-IS.
Observe the relevant local accident prevention regulations and general safety
■
regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
■
vicinity of the instrument and readily accessible to skilled personnel at any time. Pass
the operating instructions on to the next operator or owner of the instrument.
Skilled personnel must have carefully read and understood the operating instructions
■
prior to beginning any work.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with
■
international standards.
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
4
www.wika.de / www.wika.com
CT 15.51
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.de
WIKA operating instructions, reference pressure sensor, model CPT7000-IS