Herunterladen Diese Seite drucken

The Sureflap Rfid Collar Tag; Learn Mode - Sure Flap Microchip Cat Flap Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für Microchip Cat Flap:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 23

4. The SureFlap RFID Collar Tag

We recommend microchipping over the use of collar mounted tags, as microchips are a
permanent form of identification that cannot become lost.
However, if your pet is not, or cannot, be microchipped and you choose to use the SureFlap RFID
Collar Tag, always use a safety collar that has a breakaway buckle.
The SureFlap RFID Collar Tag is a small, lightweight tag that can be attached directly to your
pet's collar. Like microchips, each collar tag has a unique code, to prevent any non-resident pets
or strays from entering your home.
SureFlap RFID Collar Tags are available via the SureFlap website or from our retail and veterinary
stockists.

5. Learn Mode

To start operation, the SureFlap Microchip Cat Flap needs to learn the unique ID code of your
cat's microchip. This process is only required once for each cat, as the code is permanently
stored, even if the batteries are removed. Follow the simple step-by-step guide below to carry
out this process:
1.
Initially the unit will be locked and no cat will be allowed to enter the house. Make sure the
manual lock is set to position 1, allowing the door to open freely. See Figure 1.
2.
Remove the battery cover. Press the memory button for around 1 second and release. See
Figure 2.
3.
The catch will open, allowing a cat to pass through the flap in either direction. A further
indication that the unit is in learn mode is the indicator lamp which will flash every second.
See Figure 3.
4.
The next cat to pass through the flap from either direction, or to put its head into the tunnel
with its nose up to the door, will have its microchip number stored in the memory (assuming
it has a microchip implanted).
5.
Once a cat's microchip number has been successfully learnt, the flap reverts to normal
operation. The indicator lamp stops flashing and the catch will close a couple of seconds
after the cat has moved away from the cat flap.
For multiple cats, repeat the process until all cats' microchip numbers have been learnt. The
microchip numbers of up to 32 different cats can be stored in memory at once. Replace the
battery cover when the learn process has been completed for each cat.
This method of learning is particularly convenient for uncooperative cats! Rather than having to
find your cat and pass it through the flap, you can simply set to learn mode and leave until it next
decides to go through of its own free will.
To cancel learn mode (e.g. after pressing the memory button accidentally) simply press the
memory button again for around 1 second and the unit will revert to normal operation.
In order to learn a cat's microchip number, a sensor located in the tunnel must detect a
cat's presence to trigger the microchip reader. Therefore it is important to ensure that
your cat either puts its head into the tunnel or passes through the flap. No amount of
waving your cat in front of the flap will have an effect.
7

Quicklinks ausblenden:

Werbung

Fehlerbehebung

loading