Operation; Compressed Air Ratchet; Switching On And Off - Parkside PDRS 6.3 B2 Originalbetriebsanleitung

Operation

Compressed air ratchet

♦ Fit the required plug-in attachment
sion piece
♦ Set the correct rotational direction on the turn bolt
R = anticlockwise
F = clockwise
♦ Fit the plug-in attachment onto the screw head .
NOTE
► The connection with the compressed air source is made using a
flexible compressed air hose with a quick coupler .
You will reach the best performance of your ratchet wrench
with a compressed air hose (LW) with inside diameter 10 mm .

Switching on and off

Switching on:
♦ Press the trigger
Switching off:
♦ Release the trigger
♦ When you have finished working, disconnect the tool from the
compressed air source .
■ 24 │ GB │ CY
onto the square retainer
to turn the appliance on .
.
, , + or the exten-
.
PDRS 6.3 B2
: