4
Getting out of the setting
mode
Press the SEL button and the
corrected date appears on the
LCD panel.
•If another button is pressed while
setting the date/time, all previously set
data will remain unchanged.
•The date appearing in the illustration
above shows "2000, April, 25."
When the battery is replaced
•Note that the current data may be reset
when the battery is replaced.
•If the data is reset, repeat procedures
from 1 to 4 to set the date and time.
•No data will be recorded if "
appears on the LCD.
"
- - - - - -
E
29