Removing The Combustion Chamber Lining - attika NEXO Serie Installationsanleitung

REMOVING THE COMBUSTION CHAMBER LINING – WITHOUT SIDE GLASS

REMOVING THE COMBUSTION CHAMBER LINING

Stove without side glass:
The combustion chamber lining is removed as follows:
1. R emove the lock (1) at both sides. This is pushed upwards
until it comes free of the hole. It can then be removed from
the stove.
2. A fter that, the smoke converter plate (2) can be removed
by lifting it up.
3. T he front combustion chamber lining (3) is lifted and can
be taken out.
4. T he bottom combustion chamber lining (4) and (5) is lifted
up.
5. T he side combustion chamber lining (6) and (7) is removed
by rotating them inwards at the front until they come loose.
It can then be taken out.
6. F inally, the rear combustion chamber lining (8) can be ta-
ken out.
Reverse this sequence when refitting the combustion chamber
lining.
1
TILLADTE AFVIGELSER FOR LINIEÆRE MÅL
0.5-3 3-6 30-120
6-30
120-400
0.1 0.1 0.2 0.3
0.5
    
TILLADTE AFVIGELSER FOR VINKELMÅL
0-10 10-50
50-120
KORTESTE SIDE
1° 0-30° 0-20°
 
VINKELAFVIGELSE 
AFVIGELSE I MM
pr. 100 mm 1.8
0.9
  
A
4
D M Y
Change order
Drawing change:
1
INDUSTRIVEJ 20, 9900 FREDERIKSHAVN, DENMARK
400-1000 1000-2000
Phone +45 98 47 90 33 - Fax +45 98 47 92 91
0.8
1.2
  E-mail: info@rais.dk - Homepage: www.rais.dk
Drawing name:
120-400
> 400
0-10°
0-5°
 
Project:
0.6 0.3 0.15
 
6 2 8
3 5 7
Corrections:
Designer:
PCH
Improvement proposal:
Established:
13-06-2018
Bend Tool:
Remarks:
Material:
Afmonter skamol uden sideglas
Revision: Drawing no.:
10-0101-8609
Project manager: Approved:
Format:
A3
OV UV
6
4 3
D M Y Correctio
GB - 19