attika NEXO Serie Installationsanleitung Seite 86

REMOVING THE COMBUSTION CHAMBER LINING - WITH SIDE GLASS
REMOVING THE COMBUSTION CHAMBER LINING
Stove with side glass:
The combustion chamber lining is removed as follows:
1. R emove the lock (1) at both sides. This is pushed upwards
until it comes free of the hole. It can then be removed from
the stove.
2. A fter that, the smoke converter plate (2) can be removed
by lifting it up.
3. T he front combustion chamber lining (3) is lifted and can
be taken out.
A
4. T he bottom combustion chamber lining (4) and (5) is lifted
up and can be taken out.
5. T he lower side combustion chamber lining (6) and (8) is
taken out.
6. T he upper side combustion chamber lining (7) and (9) is
taken out.
7. F inally, the rear combustion chamber lining (10) is taken out.
Reverse this sequence when refitting the combustion chamber
lining.
20 - GB
1
TILLADTE AFVIGELSER FOR LINIEÆRE MÅL
0.5-3 3-6
6-30 30-120
0.1 0.1 0.2
0.3
   
TILLADTE AFVIGELSER FOR VINKELMÅL
0-10 10-50
KORTESTE SIDE
1° 0-30°
VINKELAFVIGELSE  
AFVIGELSE I MM
pr. 100 mm 1.8


A
6
D M Y
1
Change order
Drawing change:
INDUSTRIVEJ 20, 9900 FREDERIKSHAVN, DENMARK
1000-2000
120-400 400-1000
Phone +45 98 47 90 33 - Fax +45 98 47 92 91
0.5 0.8 1.2
 E-mail: info@rais.dk - Homepage: www.rais.dk
 
Drawing name:
50-120 120-400 > 400
0-20° 0-10°
0-5°
 

Project:
0.3 0.15
0.9 0.6
  
7 2 10
3 4 5 8
Corrections:
Designer:
Improvement proposal:
Established:
13-06-2018
Bend Tool:
Remarks:
Material:
Afmonter skamol, med sideglas
Revision: Drawing no.:
10-0111-8609
9
Project manager: Approved:
PCH
Format:
A3
OV UV
6 3
D M Y
Change orde
Drawing change