Personal Safety; Careful Handling And Use Of Electrical Power Tools - Parkside PDS 200 A Bedienungs- Und Sicherheitshinweise

Safety advice
J
shock.
J
Do not use the mains lead for any purpose for
which it was not intended, e.g. to carry the de-
vice or to pull the mains plug out of the mains
socket. Keep the mains lead away from heat,
oil, sharp edges or moving parts of the device.
Damaged or tangled mains leads or plugs in-
crease the risk of electric shock.
J
J
Check the condition of the plug and cable on
your electrical power tool regularly and have
any damage repaired by a competent special-
ist.
J
When working outdoors always use extension
cables that are also approved for use out-
doors. The use of an extension cable suitable
for outdoor use reduces the risk of electric
shock.
J
Do not use the device if it has any damaged
parts. If a dangerous situation arises pull out
the mains plug from the socket immediately.
m Warning! Never open the device. Always
have any repairs carried out or replacement
parts fitted at the service centre or by an elec-
trical equipment repair specialist.

Personal safety

J
Remain alert at all times and always watch
what you are doing. Work carefully when us-
ing an electrical power tool.
Do not use the device if you cannot concen-
trate or are tired or under the influence of
drugs, alcohol or medication.
Just one moment of carelessness when using
the device can lead to serious injury.
J
equipment such as dust masks, non-slip safety
shoes, protective gloves, safety helmets or ear
8 GB/IE/CY
Downloaded from www.Manualslib.com
Keep the device away from rain or
moisture. Water entering an electrical
device increases the risk of electric
A damaged tool, mains lead or plug
presents a serious danger to life
from electric shock.
Wear personal protective equipment
and always wear safety glasses.
The wearing of personal protective
manuals search engine
protectors, appropriate to the type of electrical
power tool used and work undertaken, reduces
the risk of injury.
J
Avoid unintentional operation of the device.
Make sure that the switch is in the "OFF" posi-
tion before you insert the mains plug into the
socket. Accidents can happen if you carry the
device with your finger on the ON/OFF switch
or you have already switched the device on
before you connect it to the mains.
J
Remove any setting tools or spanners before
you switch the device on.
A tool or spanner left attached to a rotating
part of a device can lead to injury.
J
Do not overestimate your own abilities. Keep
proper footing and balance at all times. By do-
ing this you will be in a better position to con-
trol the device in unforeseen circumstances.
J
Wear suitable clothing. Do not wear loose
clothing or jewellery. Keep your hair, clothing
and gloves clear of moving parts. If you have
long hair, wear a hair net. Clothing, jewellery
or hair that is loose or hangs from your body,
head or limbs can become trapped in moving
parts.
Careful handling and use of
electrical power tools
J
Do not overload the device. Always use an
electrical power tool that is intended for the
task you are undertaking. By using the right
electrical power tool for the job you will work
more safely and achieve a better result.
J
Do not use an electrical power tool if its switch
is defective. An electrical power tool that can
no longer be switched on and off is dangerous
and must be repaired.
J
Pull the mains plug from the socket before you
make any adjustments to the device, change
accessories or when the device is put away.
This precaution is intended to prevent you from
unintentionally starting the device.
J
When not in use always ensure that electrical
power tools are kept out of reach of children.
Do not let anyone use the device if he or she is