Herunterladen Inhalt Inhalt Diese Seite drucken

Outdoor Temperature; Wind Speed Alarm - National Geographic 265NE Bedienungsanleitung

Touchscreen-wetterstation mit pc-software für zu hause
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 30

5.0 Outdoor Temperature

5.0 Outdoor Temperature
1. Touch the OUTDOOR TEMPERATURE section.
2. Procedures and settings are similar to the Indoor Temperature.
(Follow steps in sections 4.0 to 4.2)
1. Touch the INDOOR HUMIDITY section.
2. Procedures and settings are similar to the Indoor Temperature.
(Follow steps in sections 4.0 to 4.2)
1. Touch the OUTDOOR HUMIDITY section.
2. Procedures and settings are similar to the Indoor Temperature.
(Follow steps in sections 4.0 to 4.2)
8.0 Wind Speed
8.0 Wind Speed
1. Touch the WIND SPEED section, + and – buttons will start to fl ash.
2. Touch the + or – buttons to switch between wind speed and wind gust.
3. When on wind speed touch the WIND SPEED section to confi rm.
4. Touch the + or – buttons to select the wind speed measurement value in
Kilometers per hour (km/h), miles per hour (mph), meters/second (m/s), knots
(knots), beaufort (bft). Touch the WIND SPEED section to confi rm.

8.1 Wind Speed Alarm

8.1 Wind Speed Alarm
5. The wind speed high alarm icon (HI AL) will start to fl ash as well as the + and
– buttons.
6. Touch the + or – button to change the value, touch the ON/OFF button to enable
or disable the alarm. Touch the WIND SPEED section to confi rm.
7. The wind direction arrow and the + and – buttons will start to fl ash. Touch the + or
– buttons to set the desired wind direction. Touch the ON/OFF button to enable or
disable the alarm
8. Touch the WIND SPEED section to confi rm.
9. Once the wind speed and direction alarms are set, the maximum wind speed will be
displayed. To reset the maximum wind speed touch and hold the fl ashing maximum
value for 3 seconds, the value will reset to the current reading.
10. Touch the WIND SPEED section to confi rm.
1. Touch the RAIN section, + and – buttons will start to fl ash.
2. Touch the + or – buttons to switch between 1h, 24h, week, month and total
rainfall.
3. Touch the RAIN section to confi rm.
4. Touch the + or – buttons to select the rain measurement value in mm or inches.
5. Touch the RAIN section to confi rm.
9.1 Rain Alarm
9.1 Rain Alarm
6. The rain high alarm icon (HI AL) will start to fl ash as well as the + and – buttons.
7. Touch the + or – button to change the value, touch the ON/OFF button to enable
or disable the alarm. Touch the RAIN section to confi rm.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis