Mounting The Sensors - National Geographic 265NE Bedienungsanleitung

Touch Screen Home Weather Station With PC Software Touch Screen Home Weather Station With PC Software
Monitor: Monitor:
B. Outdoor Temperature and Humidity B. Outdoor Temperature and Humidity
K. Radio Controlled Clock (RCC) K. Radio Controlled Clock (RCC)
2. Wind Direction Sensor 2. Wind Direction Sensor
This weather station includes a touch screen monitor, a transmitter, wind direction
sensor, wind speed sensor, rain gauge sensor, USB cable and PC software on CD-ROM.
1. On the edge of the wind direction sensor North (N), East (E), South (S) and West
(W) are labeled accordingly. The sensor has to be adjusted so that the directions
on the sensor are pointing in the correct direction (i.e. the N has to be pointing
North; E has to be pointing East, etc.).
2. The wind speed sensor wire has to be inserted into the phone jack on the wind
direction sensor located underneath the sensor.
3. The wind direction sensor wire has to be inserted into the phone jack on the
transmitter, labeled WIND.
4. Insert the rain gauge sensor wire into the transmitter, labeled RAIN.
Make sure all components are working properly before permanently

1.2 Mounting the Sensors

1.2 Mounting the Sensors