Dynacord PRO MATRIX SYSTEM DPA 4245 Bedienungsanleitung Seite 26

Mains Operation And Leakage Power
The mains power consumption as well as the leakage power is stated for driving the power amplifier at
different levels. All the values were measured at nominal load via the 100 V output with two channels
driven. The shown values differ only slightly when the appliance is operated at different nominal output
voltages or in the Direct Out mode.
mains operation at the 100
DPA 4245
normal operation (-10 dB)
alarm (-3 dB)
nominal conditions
DPA 4260
normal operation(-10 dB)
alarm (-3 dB)
nominal conditions
initial current inrush for both models: < 38 A
Pmains[VA] = apparent power Umains*Imains, Pmains[W] = active power, Pout[W] = output power,
Pv[W] = leakage power, 1BTU = 1055.06 W/s
Fuses
location
rear panel DPA 4245
rear panel DPA 4245
print 84171/1
print 84171/1
Extension Kits For The DPA 4245 And The DPA 4260:
NRS 90208 balanced input (input transformer for a single channel)
NRS 90235 1 pair of rack-mount ears
Downloaded from www.Manualslib.com
Umains[V]
V output
idling 230V
230V
230V
230V
idling 230V
230V
230V
230V
pos.
—- mains fuse 230V~ AC
—- mains fuse 230V~ AC
F1
F2
manuals search engine
Imains [A] Pmains Pmains [W]
[VA]
0,34 78 47
2,76 635 490
5,54 1274 1040
7,45 1714 1420
0,57 131 80
3,66 842 655
7,34 1688 1370
9,86 2268 1900
utilization value
T8A 250V
T10A 250V
power supply T1A 250V
power supply T1A 250V
26
Pout [W] Pv [W] BTU/hr
— 47 160
70 420 1430
352 688 2347
700 720 2456
— 80 273
101 554 1890
506 864 2948
1000 900 3070
dimensions standard
5 x 20 mm IEC 127
5 x 20 mm IEC 127
5 x 20 mm IEC 127
5 x 20 mm IEC 127