Removing Jammed Documents - Fujitsu fi-565PR Bedienungshandbuch

8. Position the Print Cartridge Holder along where
the document will pass through and position the
print on the scanned page properly for your
application.
ATTENTION
9. Close the Print Cartridge Cover.
10. Turn on the scanner.
11. Reset the Ink Remain Counter.
On the [Start] menu, select [Programs]-[Scanner Utility
for Microsoft Windows]-[Software Operation Panel].
Select the [Device Setting] tab.
Click the [Clear] button at the [Remaining Ink] tab.
The Ink remain counter will reset to 100%.
12 |
Downloaded from www.Manualslib.com
Printing too close to a document's edge can
leave little or no room for further printing, be
sure to position the print cartridge to have
enough space.
You must reset the Ink Remain Counter
whenever you replace the print cartridge.
manuals search engine

3.5. Removing Jammed Documents

Remove jammed documents sheets as follows:
ATTENTION
Do not forcefully pull out the documents pages.
1. Remove the documents that are not jammed in
the imprinter or scanner feed from the ADF Paper
chute.
2. Grab center of the Imprinter Cover, pull and turn it
towards you to open the cover.
To open the ADF Cover, first open the
ATTENTION
Imprinter Cover before proceeding.
3. Pull open the ADF cover as below.
ADF Cover
Imprinter Cover
4. Remove the jammed documents from the
imprinter or scanner ADF.
5. Close the ADF cover.
ADF Cover
Imprinter Cover
ADF Cover
Imprinter Cover