Basic Operation; Positioning The Print Cartridge; How To Use The Paper Guides - Fujitsu fi-565PR Bedienungshandbuch

3. Basic Operation

3.1. Positioning the Print Cartridge

To Position the print cartridge for printing:
1. Open the Print Cartridge Cover.
2. Slide the print cartridge holder, as below, to the
left or right within the document width to set it at a
suitable print starting position.
HINT

3.2. How to Use the Paper Guides

Use the Paper Guides to prevent against paper jams due to
curling of the edges, as shown below.
Downloaded from www.Manualslib.com
●
The small "▲" protruding from the upper right
hand side of the print cartridge tray handle
indicates the beginning print position on the
page.
●
Above the print cartridge tray are document
paper size markings; please use them to
adjust for printing positions.
●
Put the actual document in the ADF and
confirm that the print cartridge is positioned
within the document's width.
Feed direction
manuals search engine
Place the Paper Guides at the ends where the paper edges
will pass through.
1. Insert the document in the scanner.
2. Open the Print Cartridge Cover.
3. Slide the Paper Guides to the left and right of the
page edges.
Paper Guide
When you wish to print on the near the edges of
HINT
a wide width paper, remove the Paper Guide in
order to open space for the Print Cartridge, and
attach it at the center.
For Right Side Edge Printing
For Left Side Edge Printing
Be careful not to let the Paper Guide touch or
ATTENTION
catch onto the print circuit film.
fi-565PR Imprinter Operator's Guide | 9