Miomare HG00518 Montage-Und Sicherheitshinweise Seite 7

The shower rod 9 should not be used to
attach or support anything, as the fixings and
the rod 9 are designed to support only their
own weight.
Avoid damage to property!
Assembly should only be carried out by an
experienced person!
Before wall mounting, check that the wall can
take the weight of the shower rod set. If in
doubt, ask in a specialist shop.
CAUTION! WATER DAMAGE! Before
drilling, ensure that there are no water pipes
where you intend to drill.
Ensure that all gaskets 2 are correctly seated.
Please note that gaskets 2 are wear parts
and therefore will require to be replaced from
time to time.
Examine the wall before installation and
choose suitable installation fixings. We have
supplied fixings suitable for an ordinary solid
masonry wall.
Remark: The hand shower 1 has
a waterstop function: Slightly dripping
water will remind you to turn off the
shower.
˜ Mounting
Remarks:
For fittings with 26.4 mm (G ¾")
connection, use an adaptor with
26.4 mm (G ¾") inner thread
and 21 mm (G ½") outer thread,
available in DIY store or bathroom
shops.
A water-saving insert 4 is included
in your shower rod set.
The conical nut of the shower
hose can rotate freely for anti-twist
function.
6 GB/IE/NI
˜ Operation
˜ How to adjust the hand
shower
Adjust the height of the hand shower holder 10
by using the adjustment knob 16 .
Adjust the angle at which the hand shower 1
is tilted by using the hand shower holder 10 .
˜ Shower functions
Turn the hand shower lever 15 to set the hand
shower 1 function you wish to have (see
Fig. E).
The hand shower 1 has the following
functions:
Massage
Rain + Massage
Rain