User Instructions; Symbols Used In The Documentation; Warnings In The Documentation; Target Group - Bosch DAS 3000 Reparaturanleitung

en | 20 | DAS 3000
1.

User instructions

---Separator--- 1.1

Symbols used in the documentation

Warning of possible physical damage to the
component or product or of environmental
pollution.
---Separator---
Practical hints, recommendation or reference
to other information.
---Separator---
Warning of danger for the operator during
subsequent procedures.
---Separator---
Single-step procedure.
---Separator---
Optional step.
---Separator---
Result of a procedure.
---Separator---
Reference to a figure. Example:
means figure 12, item 2.
---Separator---
Reference to a page.
---Separator---
1.2

Warnings in the documentation

Warning notices warn of dangers to the user or people in the vicinity. Warnings also indicate the type, source and
consequences of the danger as well as preventive action.
Warning notices have the following structure:
Warning symbol Type, source and consequences of the danger.
 Actions and instructions to prevent the danger.
The signal word indicates the likelihood of occurrence and the severity of the danger in the event of non-observ‐
ance:
Signal word Likelihood of occurrence
DANGER Immediate threat of danger
WARNING Possible impending danger
CAUTION Possible dangerous situation
---Separator---
1.3

Target group

Repair of the DAS 3000 may only be performed by service technicians.
---Separator---
1.4

Other applicable documents

• 1 689 989 444 - Original instructions DAS 3000
• 1 689 973 484 - Spare parts list DAS 3000
---Separator---
1.5

Tools and aids needed

We recommend the following electronic spirit level: "STABILA TECH 196 (183 cm)".
---
Tools required:
• Electronic spirit level (minimum length: 183 cm; measuring accuracy in normal position/reversed position:
0.50 mm/m; accuracy with electronic inclinometer at 0° and 90°: 0.05°; accuracy with electronic inclinometer at
1° to 89°: 0.05)
• Adapter for electronic spirit level (1 687 010 717)
• Feeler gauge (nominal thickness 1 mm, to DIN 2275)
• Line laser P-Assist S5 (1 690 381 124)
• Mount for P-Assist S5 (1 688 120 189)
• Tape measure or distance laser (1 687 010 600)
---
1 689 975 292 | 2020-02-28
12(2)
Signal word
Severity of danger with non-observance
Death or severe injury
Death or severe injury
Minor injury
Robert Bosch GmbH