Bosch DAS 3000 Reparaturanleitung Seite 34

en | 34 | DAS 3000
1
(1)
3. Unscrew the handle
(2)
4. Remove tension spring
(4)
5. Remove rubber buffer
6. Pull out the draw bar (5).
7. Replace old mounting bracket
1
3
2
4
8. Insert new bearings in the mounting bracket and bottom of the trolley.
9. Guide the draw bar through the mounting bracket and opening at the bottom of the trolley.
10. Attach rubber buffer to the bottom of the draw bar.
11. Attach handle to the draw bar.
12. Attach tension spring with mounting to the draw bar.
1 689 975 292 | 2020-02-28
from the draw bar.
(3)
with mounting from the draw bar and the trolley.
from the draw bar.
(6)
with the new mounting bracket.
6
5
Robert Bosch GmbH