Daily Use - IKEA FRAMTID Handbuch

ENGLISH
Daily use
Start protection / key lock
This automatic safety function is activated
one minute after the oven has returned to
"stand by mode". (The oven is in "stand by"
when the 24-hour clock is displayed or if the
clock has not been set, when the display is
blank).
The door must be opened and closed e.g.
putting food into it, before the safety lock is
released. Else the display will show "DOOR".
Cooling down
When a function is finished, the oven may
carry out a cooling procedure. This is
normal.
After this procedure the oven switches off
automatically.
The cooling procedure can be interrupted
without any harm to the oven by opening
the door.
Kitchen timer
Use this function when you need a kitchen
timer to measure exact time for various
purposes such as cooking eggs or letting the
dough rise before baking etc.
2
1. Press the +/- buttons to set the desired
length of the timer.
2. Press the Power button repeatedly to set
the power to 0 W.
3. Press the Start button.
An acoustic signal will be heard when the
timer has finished to count down.
Pressing the Stop button before the timer
has finished will reset the timer to zero.
1 3
Clock
Keep the door open while setting the Clock.
This gives you 10 minutes to complete the
setting of the Clock. Otherwise, each step
must be accomplished within 60 seconds.
1
1. Press the Stop button (3 seconds) until
the left-hand digit (hour's) flicker.
2. Press the +/- buttons to set the hours.
3. Press the Start button (The two right
hand digits (minutes) flicker).
4. Press the +/- buttons to set the minutes.
5. Press the Start button again.
The clock is set and in operation.
NOTE: when the appliance is first plugged
in or after a power failure, the display is
blank. If the clock is not set, the display will
remain blank until the cooking time is set.
9
2/4 3/5