2- Contents Of Pack - Motorline MCBT80 Installations- Und Gebrauchsanweisung

EN
5- TRANSPORT AND HANDLING
5.2.2- Contents of pack
Single actuator
Each standard product pack (cardboard box) contains (Fig. 6 page 106):
• 1 Actuator complete with power cable;
• 1 Butterfly bracket kit (Ref. A) complete with nut and bolt;
• 1 Actuator support bracket kit (Ref. B) complete with nuts and bolts;
• Bag of fixing screws for aluminium window frames;
• 1 Installation and use instructions (Ref. C).
Pair of actuators
Each standard product pack (cardboard box) contains (Fig. 6 page 106):
• 1 Actuator complete with power cable;
• 1 Butterfly bracket kit (Ref. A) complete with nut and bolt;
• 1 Actuator support bracket kit (Ref. D) complete with nuts and bolts;
• 1 Connection kit (Ref. E) comprising a rod (A1), a head (T1), an extension (P1), nuts
and bolts;
• Bag of fixing screws for aluminium window frames;
• 1 Installation and use instructions (Ref. C).
MAKE SURE THE ABOVE COMPONENTS ARE INSIDE THE PACK AND THAT THE
ACTUATOR HAS NOT SUFFERED DAMAGE DURING TRANSPORT.
IF ANY FAULTS ARE FOUND, DO NOT INSTALL THE ACTUATOR BUT CONTACT THE
TECHNICAL ASSISTANCE SERVICE OF YOUR LOCAL DEALER OR MANUFACTURER.
DISPOSE OF THE PACKAGING (PAPER, PLASTIC, ETC.) IN COMPLIANCE WITH
CURRENT LEGISLATION.
34 INSTALLATION AND USE INSTRUCTIONS ISTRUZIONI PER L'INSTALLAZIONE E L'USO
MCBT80
VER.1.0 VER.1.0
13
REV.08.06 REV.11.05