Herunterladen Inhalt Inhalt Diese Seite drucken

Assembling The Vacuum Cleaner - Team Kalorik TKG SKV 1004 Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Copies of the I/B. Please reproduce them without any changes except
under special instruction from Team International BELGIUM. The pages
must be reproduced and folded in order to obtain a booklet A5 (+/-
148.5 mm width x 210 mm height). When folding, make sure you keep
the good numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
Fax +32 2 359 95 50
• Never vacuum toxic materials, as vapors and dust can be
hazardous to your health.
• Never use the appliance to vacuum mortar, cement or other
substances that harden on contact with water and may interfere
with normal operation of the vacuum cleaner.
• Do not use the appliance on pets.
• Sparks within the motor can ignite flammable vapors or dust. Never
use it near flammable or explosive liquids (such as gasoline, oil
paints, detergents), near gases, explosive substances (such as
coal dust, magnesium, gunpowder), smoke or fire sources.
• Use only accessories recommended by the supplier. Other
accessories pose a danger to the user and could damage the
appliance.
• Always unplug the AC adapter from the wall outlet by pulling on the
plug itself. Never pull on the charging cable.
• Regularly remove blockages caused by hair, dust fluff and the like
in order not to reduce the suction power.

ASSEMBLING THE VACUUM CLEANER

Unpack the device and all accessories.
Make sure that all parts mentioned in the manual are present and undamaged.
Carefully secure the handle (8) to the main unit. To do this, carefully pull on the supplied
locking screw (9) (Ill. 4, Fig. 1).
Insert the hand vacuum cleaner (4) into the main unit. For this, the device must always be
switched off. Pay attention to the "click" sound when snapping in (Ill. 4, Fig. 3). Make sure that
there are no substances between the contacts of the handpiece (4) and the main unit,
Charge the battery in the following situations:
Before first use; in this case, the battery must be fully charged (6-8 hours).
-
After a long period without use. (For optimal battery life, we recommend charging
-
the device at least every three months.)
To load, the hand vacuum cleaner (4) must be inserted in the main unit (Ill. 5, Fig. 4).
Plug the mains adapter of the charging cable (14) into a socket (Ill. 5, Fig. 5). Connect the
charging cable (14) to the charging port (10) of the main unit (Ill. 5,Fig. 6). Make sure that the
contacts on the charging cable and the vacuum cleaner are clean. If necessary, remove the
charging cable and clean the connectors.
The charge indicator (4) turns red while the battery is charging (Ill. 5, Fig. 7) and turns to blue
when the battery is fully charged.
Both the charging cable and the vacuum cleaner may become warm while charging. This is
completely normal.
Back cover page (last page)
Assembly page 10/40

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis