Christopeit Runner Pro Magnetic Montageanleitung Und Bedienungsanleitung Seite 17

Computer manual for 9829
The supplied computer offers greatest comfort during training. Each
training relevant value is displayed in the window.
Right from the beginning of the training the required time, the current
speed, approximate calorie consumption, covered distance and the
current pulse. All values are secured counting from zero onwards.
Pressing F key or simply the beginning of the training can switch on the
computer.
Just begin with the training for starting the computer. The computer
begins to enter and display all values.
Just stop the training for stopping the computer. The computer stops all
measurements and stores the last obtained value. The last obtained
value in the TIME, CALORIES and KM functions are saved and it is
possible to the restart the training from these values while resuming the
training once more.
The computer is shut down approx 4 minutes after stopping the training.
All values obtained till then are deleted.
Displays:
All individual functions can be selected with „F" key.
and the corresponding data are displayed in the window.
Which function would be selected, is displayed with a symbol in the
window beside the pressed function name.
1. „Pulse" Display:
Current pulses in per minute strikes are displayed.
It is not possible to allocate specific values. The last obtained values are
not saved in this function.
(maximum limit of displays is 240 pulse strikes per minute)
Attention:
Grip both contact surfaces of pulse measuring grip unit (35) simultaneously
with both hands for measuring the pulse.
While doing this make sure that the contact surfaces are placed in the
center of palm of the hand.
2. „TIME" Display:
The currently required time is displayed in minutes and seconds. It is
possible to allocate a specific values (set as default) with „E" key.
If a specific time is prescribed, the time yet to be deferred is displayed.
If the prescribed value is obtained, this is displayed with an acoustic
signal.
The last obtained values are not saved in this function.
(maximum limit of display is 99.59 per minute)
3. „KM/H" Display:
Current speed in kilometers per hour are displayed.
It is not possible to allocate specific values.
The last obtained values are not saved in this function.
(maximum limit of display is 99.9 km/h)
4. „CALORIES" Display:
Current status of consumed calories is displayed. It is possible to allocate
a specific values (set as default) with „E" key.
If a specific time is prescribed, this is displayed as counted per minute.
If the prescribed value is obtained, this is displayed with an acoustic
signal.
The last obtained values are not saved in this function.
(maximum limit of display is 999.9 calories)
5. „KM" Display:
Current status of covered kilometers is displayed. It is possible to allocate
a specific values (set as default) with „E" key.
If a specific distance is prescribed, the distance yet to be deferred is
displayed. If the prescribed value is obtained, this is displayed with an
acoustic signal.
The last obtained values are not saved in this function.
(maximum limit of display is 999.9 km)
6. „SCAN" Function:
If this function is selected, current values of al functions are displayed
successively in the continuous passing of approx. 5 seconds.
Tast ing function:
1. „F" key
It is possible to change from function to other by lightly pressing „F" key
once. The relevant value is then displayed in respective window. If the
key is pressed for a longer time (approx. 3 seconds) all values of all
displays that were obtained last are canceled. Similarly the acoustic
signal can be turned off by pressing this key once on obtaining the set
value.
2. „E" key
It is possible to allocate the values in individual functions step-by-step
by pressing the „E" key once. For this purpose it is necessary to selected
the required function with the „F" key.
Pressing the key for a loge period (3 sec) releases a quick forward run,
which can be stopped by pressing it once more. At the beginning of
training, it is counted starting from the prescribed value against zero.
3. „TEST" key
With this key a test is performed for assessing the fitness. In this case F1
(highest grade = high fitness) to F6 (lowest grade = low fitness) grades
are allocated.
In order to be able to perform this test, the training must be
completed/closed with the hands on the contact surface (35).
Subsequently press the „F" key once for resetting the acoustic
signals and press the „TEST" key once for stating the test program as
well as hold the contact surface of pulse measuring grip unit (35) with
both hands during the test program (display shows counting
backwards from 1 minute). After allocating the fitness grade or during
the test program it is possible to return to the main menu by pressing
the „TEST" key once again.
17