Enabling / Disabling The Beeper - OHAUS Guardian 5000 Serie Installations-, Betriebs- Und Wartungsanweisungen

Guardian 5000 Series

2.8 Enabling / Disabling the Beeper

Disabling the Beeper Setting will prevent beeps in the following scenarios:
•
Starting and Stopping the Heater
•
Starting and Stopping the Stirrer
•
When the heater reaches the set temperature
•
Starting Single Point Calibration (SPC)
1. To control the Beeper Setting, the unit must first be
in the top level of the settings menu.
2. Rotate the left knob (C) to scroll to the 'SYS'
(System) setting.
3. Briefly press the left knob (C) to enter the System
settings menu.
4. Briefly press the left knob (C) to change the
beeper setting.
5. Rotate the left knob (C) to scroll to the desired
beeper setting.
EN for enable and DIS for disable.
6. Briefly press the left knob (C) to confirm the
desired beeper setting.
7. Rotate the left knob (C) to the "BACK" icon.
8. Briefly press the left knob (C) to return to the top
level of the settings menu.
EN-27