Standby Mode - Telestar M 12i Bedienungsanleitung

7. SETTINGS
E
Activate the alarm clock via the Status line.
In the next line, set the time when the alarm clock is to be acti-
vated. Use the number pad on the remote control or the knob on
the device.
To confirm the single entries, these need to be
saved by using the ENTER button.

7.2.5. Standby mode

This function lets you adjust the display during standby
mode.
Use the ▼▲ buttons on the remote control or the knob
on the device to select the
Standby mode and press the ENTER button on the
remote control or confirm by pressing the
volume control on the device.
117 TELESTAR M12i