Approvals; Product Standard; Electromagnetic Compatibility (Emc) - Eaton CMD24VDC Handbuch

2.6 Approvals

2.7 Product standard

2.8 Electromagnetic compatibility (EMC)

￫
An annual inspection meets the requirements in accordance
with ￫ section 2.4, "Average diagnostic coverage DC
page 26.
For further calculation of the safety function see
EN/ISO 13849.
The CMD contactor monitoring device is approved by the IFA in combination
with Eaton contactors and circuit-breakers (￫ section 1.2, "System
overview", page 25). A CE declaration of conformity and a prototype test
certification are also available.
The CMD has UL and CSA approval for the US and Canadian markets.
The CMD contactor monitoring device meets the product standard for
Low-voltage switchgear and controlgear – Part 5-1:
Control circuit devices and switching elements – Electromechanical control
circuit devices, DIN/EN 60947-5-1 (IEC 60947-5-1).
No particular EMC measures are required for the CMD contactor monitoring
device.
The CMD complies with the following standards:
• DIN/EN 61000-6-2: EMC generic standard,
interference immunity for the industrial environment,
• DIN/EN 61000-6-4: EMC generic standard,
emitted interferences for the industrial environment.
CMD(24VDC), CMDTD 01/20 MN121001ZU-DE/EN www.eaton.com
2 Engineering
2.6 Approvals
",
avg
29