Approvals; Product Standard; Electromagnetic Compatibility (Emc) - Eaton CMD Handbuch

2.6 Approvals

2.7 Product standard

2.8 Electromagnetic compatibility (EMC)

￫
An annual inspection meets the requirements in accordance
with section ￫ section 2.4, "Average diagnostic coverage
DC ", page 26.
avg
For further calculation of the safety function see EN/ISO 13849.
The CMD contactor monitoring device is approved by the IFA in combination
with Eaton contactors and circuit-breakers (￫ section 1.2, "System
overview", page 25).
A CE declaration of conformity and a prototype test certification are also
available.
The contactor monitoring device CMD has UL and CSA approval for the US
and Canadian markets.
The CMD contactor monitoring device meets the product standard for
Low-voltage switchgear and controlgear – Part 5-1:
Control circuit devices and switching elements – Electromechanical control
circuit devices, DIN/EN 60947-5-1 (IEC 60947-5-1).
No particular EMC measures are required for the CMD contactor monitoring
device.
The CMD complies with the following regulations:
• DIN/EN 61000-6-2: EMC generic standard,
interference immunity for the industrial environment,
• DIN/EN 61000-6-4: EMC generic standard,
emitted interferences for the industrial environment.
CMD(220-240VAC), CMDB 01/20 MN121002ZU-DE/EN www.eaton.com
2 Engineering
2.6 Approvals
29