Indicators On The Operation Panel; Setting Print Conditions From Printer Driver - Olivetti Copia 9915F Druckerbedienungsanleitung

PRINTING A PAGE
G
If copying is being performed when printing is started, copying will continue.
After copying is complete, printing will be executed when the clear (
pressed twice or approximately 60 seconds (auto clear time)* elapse.
* The auto clear time varies with a user program setting. See the copier
G Preheat mode and auto power shut-off mode will be canceled when printing
is started.
G
If the paper size specified from the software application is larger than the
paper size in the printer, the image may be printed onto two sheets of paper.
G
If the paper size specified from the software application is larger than the
paper size in the printer, part of the image that is not transferred to the paper
may remain on the surface of the drum. In this case, the underside of the
paper may become dirty. If this occurs, change to the correct size paper and
print two or three pages to clean the image.

Indicators on the operation panel

The ON LINE indicator and the ready (
ON LINE
indicator
Ready indicator
ON LINE key

SETTING PRINT CONDITIONS FROM PRINTER DRIVER

The setting method for items in the printer driver are described below.
Before setting the printer driver, check the following items.
G
The Olivetti Copia 9915F printer driver has been installed in the computer to be used. If
not, see INSTALLING THE PRINTER DRIVER SOFTWARE on page 1-6.
G
The Olivetti Copia 9915F has been selected as the default printer on the computer to be
used.
1-14
operation manual.
Ready indicator
Power save
On:
indicator
Off:
ON LINE indicator
On:
Blinking: Indicates copier setting is being performed
Off:
ON LINE key
Changes modes from off-line to on-line.
Power save indicator
On:
) indicator indicate the state of the printer.
Indicates the printer is ready for printing (on
line), data is being received from a computer
or printing is being performed.
Indicates copying is being performed or the
printer is in the auto power shut-off mode.
Indicates the printer is ready for printing (on
line) or printing is being performed.
during printing or data is being received from
a computer.
Copying is being performed.
Indicates the printer is in a power save mode.
) key is