Olivetti Copia 9915F Druckerbedienungsanleitung Seite 12

INSTALLING THE PRINTER DRIVER SOFTWARE
Insert the installation CD-ROM into the CD-ROM drive. (If you are using the USB
6
interface, confirm that the installation CD-ROM is in the CD-ROM drive.) Select the
CD-ROM drive and click the Next button.
Windows driver file search will find the device "Copia 9915F". Click the Next button.
7
Proceed to step 9.
Insert the installation CD-ROM into the CD-ROM drive. (If you are using the USB
8
interface, confirm that the installation CD-ROM is in the CD-ROM drive.) Click the
Start button and select Run. When the window shown below appears, type R:\SETUP
(if the CD-ROM is designated as drive R) and click the OK button. Proceed to step 9.
The installation program will start. To select a different folder, select Browse and type
9
in the path and folder name where the printer driver will be installed. Click OK and say
YES to create the folder, select the Next button to continue. To install the printer driver
to the default folder, click the Next button.
On the display you will see "printer port to be used". The printer port is selected
10
automatically. If you are using the parallel interface, this is LPT1. If you are using the
USB interface, this is LPT/USB1. Ensure that Yes is checked to use the printer as the
default printer. Finally click the Next button.
A "Confirm installation" window will be displayed. To continue installation, click the Yes
11
button.
When the installation is complete, you will be asked whether or not to print a test page.
12
If you wish to do so, click the Yes button. At this time, ensure that paper is loaded in the
paper tray.
1-10