SEH dongleserver ProMAX Schnellinstallationsanleitung Seite 8

Properties
Dimensions
WARNING
Do not operate all USB ports with maximum load!
The USB ports are grouped:
Group 1 = 1–5
Group 2 = 6–10
Group 3 = 11-15
Group 4 = 16-20
Group 1 can only be loaded with 3.3 A. Groups 2–4 can
only be loaded with 2.2 A each.
If this value is exceeded, USB ports will be deactivated
until the load is sufficiently reduced.
How to fix it:
If USB ports have been deactivated, you must decrease
the load on the UTN server to be able to use all USB
ports again. To do so, remove USB devices.
You must re-activate the USB port which has been
deactivated. All Information on how to do this can be
found in the myUTN User Manual. The documentation is
available via the link on page 9.
5
Values
Width: 422 mm
Height: 44 mm
Depth: 243 mm
Weight: 2950 g (with housing cover)
[en] Quick Installation Guide