Configuring The Utn Server - SEH dongleserver ProMAX Schnellinstallationsanleitung

 Configuring the UTN Server
The UTN server has a user interface, the dongleserver Control Center, which can
be opened in an Internet browser (Internet Explorer or Safari).
The UTN server can be configured, monitored, and maintained via the
dongleserver Control Center.
1. Open your browser.
2. Enter the IP address of the UTN server as the URL.
 The dongleserver Control Center appears in the browser.
Important:
If the dongleserver Control Center is not displayed,
check if a gateway is configured (
proxy settings of your browser.
Detailed information about the configuration of the UTN
server can be found in the Online Help of the dongleserver
Control Center.
To start the Online Help, click the '?' icon.
15

12) and check the
[en] Quick Installation Guide