Locking The Configuration Menu (Lock Setup); Resetting To Factory Defaults (Reset) - Silvercrest SFB 10.1 C3 Bedienungsanleitung

SilverCrest SFB 10.1 C3
Press to go back one menu level. To return to the start window,
press one of the device buttons.

Locking the configuration menu (LOCK SETUP)

This menu item lets you lock access to all configuration menus. While the
lock is enabled, "LOCKED" is displayed if a configuration menu is
accessed. The only option available will be the unlock option.
1. Press and hold the S button for 3 seconds.
2. Press
3. Press
"LOCK" appears on the display. Press
reads "SUCCESS" followed by "LOCK SETUP". The configuration
menus are now locked.
4. If you now attempt to change anything in a menu, the message
"LOCKED" appears.
Press to go back one menu level. To return to the start window,
press one of the device buttons.
5. To unlock, press and hold the S button for 3 seconds.
6. Press
7. Press
"LOCK" appears on the display.
8. Press
The display reads "SUCCESS" followed by "LOCK SETUP".
9. The configuration menus are now unlocked.
Press to go back one menu level. To return to the start window,
press one of the device buttons.

Resetting to factory defaults (RESET)

1. Press and hold the
2. Press
3. Press
4. Press
"MODE".
5. Press to confirm your entry.
Choosing "ALL RESET" will restore the settings for all devices. The
procedure is as follows:
6. After choosing "ALL RESET", press
read „CONFIRM RST".
You can still press
7. Press
returns to the start window.
The day of the week and the time are not reset.
Choosing "MODE" restores the settings for the selected device only. The
procedure is as follows:
8. After you confirm your selection "MODE" by pressing
display shows the device currently selected. Select the device you
want by pressing the corresponding device button.
9. After confirming your choice with
"CONFIRM RST".
You can still press
104 - English
, select "CONFIGURE" and press
, select "LOCK SETUP" and press
, select "CONFIGURE" and press
, select "LOCK SETUP" and press
, select "UNLOCK" and press
, select "CONFIGURE" and press
, select "RESET" and press
and choose between "ALL RESET" and
to cancel the reset at this point.
to confirm your entry. The display reads "OK" and then
to cancel the reset at this point.
button for 3 seconds.
to confirm. The display will
to confirm. The display
to confirm.
, the display will read
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
, the