Programming The Remote Control (Code Setup); Brand Code Search (Brand Srch) - Silvercrest SFB 10.1 C3 Bedienungsanleitung

SilverCrest SFB 10.1 C3
Upon factory delivery the device is set to the English language. Therefore
the first option shown is "LANGUAGE".
2. Press
press to confirm. The display reads "SUCCESS".
Press to go back one menu level. To return to the start window,
press one of the device buttons (4).

Programming the remote control (CODE SETUP)

This main menu item allows you to program the remote control according
to your needs. The following 3 methods are available:
1. Brand code search "BRAND SRCH". If the manufacturer of your
device is in the device code list of the remote control, this is the
fastest programming method.
2. Automatic code search "AUTO SRCH". This method runs through all
the codes available on the code list and sends them to your device.
This method takes a relatively long time.
3. Direct code input "CODE SET". This method requires entering the
code found in the device code list manually.
The operating instructions below help you program the remote control
using any of the above programming methods.

Brand code search (BRAND SRCH)

1. Press the device button of the device that you want to program.
2. Press and hold the
3. Press
confirm.
4. Press
confirm. The first brand name alphabetically for the preset devices
appears on the display.
5. Press
"SilverCrest".
6. To accelerate the brand search you can enter the first or all
characters of the brand name via the numeric keypad (11). Then
press
character of the brand name (e.g. S for SilverCrest), pressing the
button will show the first brand name starting with S. Then you need
to press the
SilverCrest brand.
As well as the digits, the keypad buttons also have characters or symbols
assigned that you can select by pressing them once or more. The
characters or symbols assigned are printed on the number keys.
After selecting a character and waiting for a few seconds, this character
is applied and you can enter the next character. You can enter up to 11
98 - English
, select one of the 5 languages offered and then
Before programming a device button by using brand
code search or automatic search, please carry out a
"RESET" for this device button. If this device had
previously been programmed using the learn function,
any learned keys would not be overwritten by the new
programming. For more information, see the chapter
"Resetting to factory defaults (RESET)" on page 104.
, select "CODE SETUP" and press
, select "BRAND SRCH" and press
to navigate to the brand name you want, e.g.
to go to the selected brand. If you only enter the first
button for 3 seconds.
buttons to manually scroll to the
to
to