Setting The Date (Date Setup); Adjusting The Keypad Light Time (Time); Global Volume Adjustment (Vol Through); Adjusting The Global Volume (Vpt Setup) - Silvercrest SFB 10.1 C3 Bedienungsanleitung

SilverCrest SFB 10.1 C3

Setting the date (DATE SETUP)

1. Press and hold the
2. Press
3. Press
4. The current date appears and the year flashes. Press the
5. Press
buttons to set the correct month.
6. Press
buttons to set the correct day. Press
display reads "SUCCESS" followed by "DATE SETUP".
7. Once the date has been set properly, in the upper right corner of the
display the abbreviated day of the week is shown.
Press to go back one menu level. To return to the start window,
press one of the device buttons.

Adjusting the keypad light time (TIME)

1. Press and hold the
2. Press
3. Press
4. Press
5-second increments between 0 and 60 seconds. If you select 0
seconds, the light remains off when any button is pressed. When set
to 0 seconds, the light can be switched on manually by pressing the
button. In this case it will light for 5 seconds.
5. Press
reads "SUCCESS" followed by "LIGHT-TIME".
Press to go back one menu level. To return to the start window,
press one of the device buttons.
Please note that setting a longer light duration will shorten
the battery life.

Global volume adjustment (VOL THROUGH)

The global volume adjustment/mute feature allows you to assign the
volume adjustment of a device that does not have this feature (e.g. a DVD
player) to a different device (e.g. a TV). The advantage is that it is not
necessary to press a device button (in the above example, the TV device
button) first and then another device button to switch back to the
playback device (the DVD player in the above example).

Adjusting the global volume (VPT SETUP)

Switching on:
1. Press and hold the
2. Press
3. Press
confirm.
4. Press
The display reads "TO DEV".
102 - English
, select "CONFIGURE" and press
, select "DATE SETUP" and press
buttons to set the correct year.
until the month display flashes. Press the
until the day display flashes. Press the
, select "CONFIGURE" and press
, select "LIGHT-TIME" and press
to set the light duration of the remote control in
to confirm your entry and save the setting. The display
, select "CONFIGURE" and press
, select "VOL THROUGH" and press
, select "VPT SETUP" and press
button for 3 seconds.
to confirm your entries. The
button for 3 seconds.
button for at least 3 seconds.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to
to confirm.