Specifications - Sony SDM-P246W Handbuch

Specifications

LCD panel
Panel type: a-Si TFT Active Matrix
Picture size: 24 inch
Input signal format
RGB operating frequency*
Horizontal: 28–92 kHz (analog RGB)
28–75 kHz (digital RGB)
Vertical: 48–85 Hz (analog RGB)
60 Hz (digital RGB)
Resolution
Horizontal: Max.1,920 dots (Only when the vertical
frequency is set to 60 Hz, the horizontal resolution is 1,600
dots or more.)
Vertical: Max.1,200 lines (Only when the vertical
frequency is set to 60 Hz, the vertical resolution is fixed to
1,200 lines.)
Input signal levels
Analog RGB video signal:
0.7 Vp-p, 75 Ω, positive
SYNC signal:
TTL level, 2.2 kΩ, positive or negative (Separate
horizontal and vertical, or composite sync)
0.3 Vp-p, 75 Ω, negative (Sync on green)
Digital RGB (DVI) signal: TMDS (Single link)
USB port
USB Full-Speed (Max. 12 Mbps)
Power requirements
100–240 V, 50–60 Hz, Max. 1.2 A
Operating temperature
5–35 C
°
Dimensions (width/height/depth)
Display (upright):
Approx. 560 × 427–495 × 275 mm (with stand)
1 7 1
× 16
(22 / / –19
8 8
Approx. 560 × 374.5 × 100 mm (without stand)
1 × 14 3 × 4 inches)
(22 / /
8 4
Mass
Approx. 12.1 kg (26 lb 11 oz) (with stand)
Approx. 8.1 kg (17 lb 14 oz) (without stand)
Plug & Play
DDC-CI/2B
Accessories
See page 8.
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µsec, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
7
× 10
/ / inches)
2 8
27
(GB)