Option Menu; Menu Position - Sony SDM-P246W Handbuch

6 Press the m/M buttons to select PHASE and press
the OK button.
The PHASE adjustment menu appears on the screen.
7 Press the m/M buttons until the horizontal stripes
are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
8 Press the OK button.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust
the PITCH using the following procedures.
9 Press the m/M buttons to select PITCH and press the
OK button.
The PITCH adjustment menu appears on the screen.
10 Press the m/M buttons until the vertical stripes
disappear.
Adjust so that the vertical stripes disappear.
11 Press the OK button.
The main menu appears on the screen.
12 Press the m/M buttons to select H CENTER or V
CENTER and press the OK button.
The H CENTER adjustment menu or V CENTER adjustment
menu appears on the screen.
13 Press the m/M buttons to center the test pattern on
the screen.
14 Click "END" on the screen to turn off the test
pattern.
x Changing the display resolution
(RESOLUTION) (for INPUT3 only)
You can change the display resolution when the current input is
different from the one displayed on the screen.
Tip
Some of the output signals from your computer may not be recognized on
the display by assigning the default setting of resolution. The actual
resolution may not be displayed as you have selected. Use this function
only when you want to change the display resolution.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The SCREEN menu appears on the screen.
3 Press the m/M buttons to select RESOLUTION and
press the OK button.
The RESOLUTION menu appears on the screen.
4 Press the m/M buttons to select the desired
resolution and press the OK button.

OPTION menu

You can adjust the following items using the OPTION menu.

• MENU POSITION

• INPUT SENSING
• LANGUAGE
• ALL RESET
• MENU LOCK
• ILLUMINATION
x MENU POSITION
You can change the menu position if it is blocking an image on
the screen.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The OPTION menu appears on the screen.
3 Press the m/M buttons to select MENU POSITION
and press the OK button.
The MENU POSITION menu appears on the screen.
4 Press the m/M buttons to select the desired position
and press the OK button.
You can choose one of 9 positions where the menu will
appear.
18
(GB)
(SCREEN) and
R E S O L U T I O N
1 6 8 0 x 1 0 5 0
1 4 0 0 x 1 0 5 0
1 6 8 0 x 1 0 5 0 / 6 0 H z
E X I T
OP T I ON
M E NU P O S I T I ON
I N P U T S E N S I N G
L A N GU A GE
A L L R E S E T
M E NU L O C K
I L L UM I N A T I ON
1 9 2 0 x 1 2 0 0
(OPTION) and
M E N U P O S T O N I I
1 9 2 0 x 1 2 0 0 / 6 0 H z
E X I T
/ 6 0 H z
E X I T