ASROCK X99 Extreme11 Handbuch Seite 11

• 10 x SATA3 6.0 Gb/s Connectors, support RAID (RAID
Storage
0, RAID 1, RAID 5, RAID 10 and Intel Rapid Storage 13),
NCQ, AHCI, Hot Plug and ASRock HDD Saver Technology
(S_SATA3_3 connector is shared with the ESATA1 port;
S_SATA3_1 connector is shared with the ESATA2 port)
(S_SATA3_2 connector is shared with the M2_1;
S_SATA3_0 connector is shared with the M2_2)
* RAID is supported on SATA3_0 ~ SATA3_5 ports only.
• 8 x SAS-3 12.0 Gb/s/SATA3 6.0 Gb/s Connectors by LSI SAS
3008 controller, support RAID (RAID 0, RAID 1, RAID
1E and RAID 10), NCQ, Hot Plug and ASRock HDD Saver
Technology
• 2 x eSATA Connectors, support NCQ, AHCI and Hot Plug
• 2 x Ultra M.2 Sockets, support M.2 SATA3 6.0 Gb/s module
and M.2 PCI Express module up to Gen3 x4 (32 Gb/s)
* If you install CPU with 28 lanes, the PCIE function of M2_2
will be disabled.
• 1 x COM Port Header
Connector
• 1 x Power LED Header
• 2 x CPU Fan Connectors (1 x 4-pin, 1 x 3-pin)
• 3 x Chassis Fan Connectors (1 x 4-pin, 2 x 3-pin) (Smart Fan
Speed Control)
• 1 x Power Fan Connector (3-pin)
• 1 x SB Fan Connector (3-pin)
• 1 x 24 pin ATX Power Connector
• 1 x 8 pin 12V Power Connector (Hi-Density Power
Connector)
• 1 x HDD Saver Connector
• 2 x PCIe Power Connectors
• 1 x Front Panel Audio Connector
• 2 x USB 2.0 Headers (support 4 USB 2.0 ports) (Supports
ESD Protection (ASRock Full Spike Protection))
• 2 x USB 3.0 Headers (Support 4 USB 3.0 ports) (Supports
ESD Protection (ASRock Full Spike Protection))
• 1 x Dr. Debug with LED
• 1 x Power Switch with LED
• 1 x Reset Switch with LED
• 1 x BIOS Selection Switch
X99 Extreme11
9