TOHATSU MFS 6BZ Benutzerhandbuch Seite 42

40
ENGINE OPERATION
1. Remove the top cowl.
2. Remove starter lock cable from
recoil starter by loosening the screw
for the starter lock cable.
7
3. Remove the bolts (3 pcs) and remove
the recoil starter.
4. Insert the knotted end of the starter
rope into the notch in the flywheel
and wind the rope around the fly-
wheel several turns clockwise.
ENOF00521-1
5. Tie a loop in the another end of the
emergency starter rope and attach
socket wrench that is included in the
tool kit.
ENOF01412-0
ENOW00860-0
Be sure to keep the harness away from the
rotation parts.
6. Be sure to install the stop switch lock
to the stop switch, and attach the
ENOF01434-0
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
7. Set the control lever in the Neutral
position.
8. Pull the starter handle slowly until
you feel engagement, keep pulling till
you feel less resistance. Then pull it
quickly.
ENOF01435-0
ENOF00527-0
CAUTION