TOHATSU MFS 6BZ Benutzerhandbuch Seite 39

Tiller handle type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
1
1. Stop switch lock
2. Set the control lever in the Neutral
position.
R
1. Shift lever
3. Set the throttle grip to START posi-
tion.
1. Throttle grip
4. Pull the choke knob fully.
ENOF00516-0
N
F
1
ENOF00531-1
1
ENOF01107-0
5.
1. Choke knob
ENON00501-0
Note
Choke is not necessary when the engine is
warm. Set the throttle grip to "RE-START"
position.
ENON00502-0
Note
If engine does not start with 4 or 5 times
starting operation, push the knob back
and restart.
(For manual starter type)
This engine is equipped with a compres-
sion release mechanism.
5. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance. Then pull it
quickly. repeat if necessar y until
started.
1
1. Slowly
2. Quickly
ENGINE OPERATION
1
ENOF00518-0
2
3
ENOF00519-0
37
7