Manual; Info - PCE Instruments PCE-VT 3700 Bedienungsanleitung

HINT: If a reset of the calibration is performed, the previously performed calibration will be
deleted and a default value for the sensor sensitivity will be selected. It is recommended
to perform a calibration after the reset.
The reset must be confirmed via the subsequent confirmation dialog when one of the reset options
is selected. The device will perform a restart after the reset has been performed.
5.4

Manual

This sub menu leads to a screen with a QR code. This code can be decoded with a suitable
scanner like e.g. a mobile phone and it contains a link which directly leads to the manual of the
PCE-VT 3700 for easy access.
5.5

Info

This sub menu shows a screen with the device name and firmware version.
Fig. 12 Confirmation dialog
© PCE Instruments
28