Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Storing and Recalling Readings
The DT300 stores up to twenty (20) readings in memory for later recall.
1.
Take a reading as previously described.
2.
With the reading displayed, press the
3.
The reading will be stored in location 1.
4.
Take another reading press the store button. This new reading will be stored in location 1 and
the previous reading from location 1 will be moved to location 2.
5.
When all twenty locations have been filled the meter begins overwriting the existing readings.
6.
The memory location number is indicated on the upper left hand area of the display (1 to 20).
7.
Use the + and – buttons to scroll through the the stored readings.
8.
To clear all readings, enter the memory mode using the Memory button
and hold the
switches to zeros.
Clear Button
Press the Clear Button
If in Memory mode, each press of the Clear button will delete an entry from memory.
and the
buttons until the displayed memory location reading value
to clear the display or to cancel the last action.
button.
8
and then press
DT300A-en-GB_v1.5 2/17
Werbung
Inhaltsverzeichnis
