The Menu Structure In Detail - Lightmaxx Nano Truss Light Mobile Bedienungsanleitung

Menu:
Navigation in the menu is via the four menu buttons below the display. Use the "Mode" button to
activate the menu, navigate via the "Up" and "Down" buttons. A corresponding selection is
confirmed with the "Enter" key.

The menu structure in detail:

1. Automatic Mode (AuTo)
Press the "Menu" key until "AuTo" appears in the display. Now press the "Enter" key to confirm
the selection.
2. Show Mode (Shou)
There are six show programs. You can set the speed and strobe effect for each show program.
Press the "Menu" button until "Shou" appears in the display. Now press the "Enter" key to
confirm the selection. Use the "Up" and "Down" buttons to select the respective show program
(01-06).
After you have selected a show program, press the "Enter" key to set the speed. The display will
now show "SPxx (00 to 99)". Use the "Up"-"Down"-buttons to adjust the speed.
Press the "Enter" button again to confirm your selection and adjust the strobe effect. The display
will show "Stxx (00 to 99)". Again, use the "Up" "Down" buttons to adjust the strobe effect
speed and press the "Enter" button to confirm your selection.
Menu Level 1
Shou
Menu Level 2
Sh01
Sh02
Sh03
Sh04
Sh05
Sh06
Function
RGBW Single Colour gradual change
Multicolour gradual change
Colour changing effect show 1
Colour changing effect show 2
RGBW single colour jump change
Multicolour jump change
ENGLISH