The Menu Structure In Detail - Lightmaxx LED PAR 64 COMPLETE POLISH Bedienungsanleitung

ENGLISH
Menu:
Navigation in the menu is via the four menu buttons below the display. Use the "Mode" button to
activate the menu, navigate via the "Up" and "Down" buttons. A corresponding selection is
confirmed with the "Enter" key.

The menu structure in detail:

If the values flash in the display, you can change them using the UP/DOWN keys.
will be. After a short time the LCD display extinguishes. When the button is pressed, it is
immediately illuminated again.
Setting the DMX address:
DMX MODE
ADDR:001
Setting the DMX mode:
CHANNEL
CH:01
Set the mode using the UP/DOWN keys.
Setting the dimmer curves:
Dimmer curve: Linear/Square
Linear: dimmer curve linear
Square: dimmer curve square
Adjust the fixed colors:
When the display shows:
1. STATIC
R00G00B00B00W00A00P00 F00
Here you can adjust the different colours and brightness via
R/G/B/W/A/UV from 00-99%.
F00 is for the strobe function with the speed of F00-F99.
Setting the internal programs:
When the display shows:
2. CHANGE（30 Colours in change）
SP01-99 F00-99
Here you can set the change speed of SP01-SP99.
F00 is for the strobe function with the speed of F00-F99.