The Menu Structure In Detail; Automatic Programs - Lightmaxx VEGA OWL Bedienungsanleitung

ENGLISH

The menu structure in detail:

DMX address:
With this function the DMX address can be set via the LED display.
The selection is done by the buttons below the display.
Press the menu button until A001 appears on the display.
By pressing the Enter key, the display shows A0.0.1!
Now the desired DMX address can be set.
Press the Enter key to confirm your selection.
DMX Channel Mode:
With this function you can set the channel mode of the moving head.
Press the Menu button until ChMd appears in the display.
Press the Enter key to enter the submenu and select the channel mode.
Press the Enter key to confirm your selection.
Speed Mode:
This function allows you to adjust the speed of the unit.
Press the Menu button, SPMd will appear in the display.
By pressing the Enter key you reach the submenu and can choose between High-Speed and
Low-Speed.
Press the Enter key to confirm your selection.
Master/Slave:
Press the Menu button until LMd appears in the display.
By pressing the Enter key you enter the submenu and can select whether the device should run
in Master or Slave mode.
Press the Enter key to confirm your selection.

Automatic programs:

Press the Menu key until SHMd appears in the display.
By pressing the Enter key you enter the submenu and can choose between the different
automatic modes.
Press the Enter key to confirm your selection.
Sound 2 Light:
Press the Menu button until Soun appears on the display.
By pressing the Enter key, you enter the submenu and can activate or deactivate the Sound 2
Light mode.
Press the Enter button to confirm your selection.