Dell PowerEdge 1955 Aktuelle Informationen Seite 9

Figure 1-1. Main System Setup Program Screen
Table 1-3. System Setup Program Main Screen Option
Option
Boot Sequence Retry
(Disabled default)
Memory Screen
Table 1-4 lists a new option on the Memory Information screen.
Table 1-4. Memory Information Screen Options
Option
Low Power Mode
(Disabled default)
Description
Enables or disables the Boot Sequence Retry feature. When set to Enabled, the
system re-attempts the boot sequence after a 30-second timeout if the previous
boot attempt failed.
Description
Enables or disables Low Power Mode. When set to Enabled, the memory runs at
reduced speed to conserve power. Disabled sets the memory to run at full speed.
Information Update
7