White Balance Setting (White Bal) - Panasonic WV-CP150E serie Bedienungsanleitung

4. Gain Control Setting (AGC ON/OFF)
You can set the gain (brightness level portion of an
image) to automatic level adjustment (ON) or fixed
level(OFF).
** CAM SET UP **
CAMERA ID
ALC/ELC
SHUTTER
AGC
WHITE BAL
AUDIO LEVEL
END
Move the cursor to the AGC parameter and select
automatic level adjustment (ON) or fixed level (OFF).

5. White Balance Setting (WHITE BAL)

5-1. Auto-Tracing White balance Mode (ATW)
You can select one of two modes for white balance
adjustment as follows:
• ATW (Auto Tracing White balance)
In this mode, the colour temperature is monitored
continuously and thereby white balance is set
automatically, The colour temperature ranger for
the proper white balance is approximately
2 600 - 6 000K.
OFF
ALC
---
ON
ATW
....I....
- +
SET UP ENABLE
Proper white balance may not be obtained under
the following conditions:
1. The colour temperature is out of the 2 600 -
6 000 K range.
2. When the scene contains mostly high colour
temperature objects, such as a blue sky or
sunset.
3. When the scene is dim.
In these cases, select the AWC mode.
Move the cursor to the WHITE BAL parameter and
select ATW. The white balance of the camera is
automatically set.
** CAM SET UP **
CAMERA ID
ALC/ELC
SHUTTER
AGC
WHITE BAL
AUDIO LEVEL
END
-22-
OFF
ALC
---
ON
ATW
-...I...+
SET UP ENABLE