Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BACK FOCAL ADJUSTMENT
The following adjustment should be made by qualified
service personnel or system installers.
1. Loosen the screws on the back focal adjusting
ring.
Screws
2. Turn the back focal adjusting ring to the desired
position.
Caution: Do not rotate the ring counterclockwise
by force after it stops. If the ring is rotated by
force, the inner lens or CCD image sensor
may be damaged.
3. Tighten the screws on the back focal adjusting
Back Focal
Adjusting Ring
-9-
ring (less than 0.5 kg.cm of torque).
Werbung
Kapitel
