Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Move the pointer to the character to be edited by
pressing
or
character area and select a new character.
3. Press
to determine the CAMERA ID.
To erase all characters in the editing area
Move the cursor to RESET and press
ters in the editing area disappear.
To determine the display position of the CAMERA
ID
1. Move the cursor to POSI, and press
play shown below appears and the CAMERA ID
starts blinking.
Blinking
WV-CP150
2. Move the CAMERA ID to the desired position by
pressing
/
/
3. Press
to fix the position of the CAMERA ID.
The mode returns to the previous CAMERA ID
menu.
. Then move the cursor to the
. All charac-
. The dis-
/
.
Notes:
• The CAMERA ID stops at the edges of the
monitor screen.
• The CAMERA ID moves faster if any of
/
/
longer.
To return to the CAM SET UP menu
Move the cursor to RET and press
UP menu appears.
2. Light Control Setting (ALC/ELC)
You can select the light control mode according to the
lens type.
ALC: If you use the auto iris lens, select this parameter.
ELC: If you use a fixed or manual iris lens, select this
parameter.
** CAM SET UP **
CAMERA ID
ALC/ELC
SHUTTER
AGC
WHITE BAL
AUDIO LEVEL
END
1. Move the cursor to the ALC/ELC parameter.
2. Select ALC or ELC.
-18-
is kept pressed for a second or
. The CAM SET
OFF
ALC
---
ON
ATW
....I....
-
+
SET UP ENABLE
/
Werbung
Kapitel
