Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION OF CAMERA
The mounting bracket can be fixed either on the top or
bottom cover of the camera.
• Mounting from the top
Remove the mount adapter from the bottom of the
camera by removing the two fixing screws. The
mounting hole is a standard photographic pan-
head screw size (1/4" - 20). Attach the mount
adapter to the top as shown in the diagram, then
mount the camera on the mounting bracket.
Make sure that the two original fixing screws are
used when mounting the mount adapter as longer
length screws may damage inner components.
Fixing Screws
Mount Adapter
-10-
Installation on the wall
DYNAMIC
SUPER
A
B
DYNAMIC
SUPER
Installation on a shelf or stand
DYNAMIC
SUPER
Installation on the ceiling
DYNAMIC
SUPER
Werbung
Kapitel
