Emptying The Waste Collectors; Cleaning - UNITED OFFICE UAVS 300 A1 Bedienungsanleitung Und Sicherheitshinweise

Emptying the waste collectors

WARNING! RISK OF INJURY!
► Remove the power plug from the power socket to prevent the appliance
from accidentally switching on.
NOTE
► Empty the waste collectors
material from being drawn into the cutting blades from below.
► Dispose of the waste material in an environmentally-responsible manner.
♦ Pull the large waste collector
♦ Take the small waste collector
♦ Empty the large waste collector
♦ Place the small waste collector
(see fig. 3).
♦ Slide the large waste collector
until you hear it click into place (see fig. 4).

Cleaning

DANGER! RISK OF ELECTRIC SHOCK!
► Always pull out the plug before cleaning the appliance. There is a risk of
electric shock!
WARNING! RISK OF INJURY!
► The appliance becomes hot during use. Allow the appliance to cool down
completely before cleaning it.
► Do not touch the cutting blades of the appliance with your fingers.
The cutting blades are very sharp!
CAUTION! PROPERTY DAMAGE!
Do not spray any oil or other lubricants into the cutter openings
These can irreparably damage the appliance.
► To avoid irreparable damage to the appliance, ensure that no moisture
gets into it during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the appliance.
UAVS 300 A1
w e
/ regularly to prevent the shredded
e
out of the appliance base
w
out of the large waste collector
e
and small waste collector
w
back in the large waste collector
e
fully into the appliance base
t
.
e
.
w
separately.
e
t
again
2 9
/ .
GB │ MT 27
│
■